Setup; Step 1: Connect Your Monitor To Your Computer; Step 2: Connect The Power Cord - Sony CPD-E200E Operating Instructions Manual

Setup

Before using your monitor, check that the following accessories
are included in your carton:
• Power cord (1)
• Windows Monitor Information Disk (1)
• Warranty card (1)
• Notes on cleaning the screen's surface (1)
• This instruction manual (1)
Step 1: Connect your monitor to
your computer
Turn off the monitor and computer before connecting.
Note
Do not touch the pins of the video cable connector as this might bend the
pins.
x Connecting to an IBM PC/AT or compatible
computer
AC IN
to video output
IBM PC/AT or
compatible computer
6
x Connecting to a Macintosh or compatible
computer
You will need a Macintosh adapter (not supplied).
AC IN 2
Macintosh adapter (not supplied)
to video output
Macintosh or compatible computer

Step 2: Connect the power cord

With the monitor and computer switched off, first connect the
power cord to the monitor, then connect it to a power outlet.
AC IN
to AC IN
to a power outlet
power cord (supplied)
(HD15)
1 (HD15)