Setup; Step 1: Connect Your Monitor To Your Computer; Step 2: Connect The Power Cord; Step 3: Turn On The Monitor And Computer - Sony Trinitron HMD-A200/L Operating Instructions Manual

Setup

Before using your monitor, check that the following accessories
are included in your carton:
• Power cord (1)
• USB cable (1)
• Windows Monitor Information Disk (1)
• Monitor stand (1)
• Hook (1) (HMD-A100 only)
• Warranty card (1)
• Notes on cleaning the screen's surface (1)
• This instruction manual (1)
Step 1: Connect your monitor to
your computer
Turn off the monitor and computer before connecting.
x x x x Connecting to an IBM PC/AT or compatible
computer
AC IN
to video output
IBM PC/AT or
compatible computer
x x x x Connecting to a Macintosh or compatible
computer
You will need a Macintosh adapter (not supplied).
AC IN
Macintosh adapter
(not supplied)
Macintosh or to video
compatible computer output
6

Step 2: Connect the power cord

With the monitor and computer switched off, first connect the
power cord to the monitor, then connect it to a power outlet.
AC IN
to a power outlet
power cord (supplied)
Step 3: Turn on the monitor and
computer
First turn on the monitor, then turn on the computer.
The installation of your monitor is complete.
If necessary, use the monitor's controls to adjust the picture.
to AC IN