Sony TRINITRON CPD-E220 Service Manual

Color computer display
Hide thumbs Also See for TRINITRON CPD-E220:

Advertisement

Quick Links

SERVICE MANUAL
CRT
Viewable image size
Resolution
Maximum
Recommended
Standard image area
Deflection frequency*
AC input voltage/current 220 to 240 V, 50/60 Hz, 0.9 A
Power consumption
Dimensions
Mass
Plug and Play
All manuals and user guides at all-guides.com
CPD-E220/E215E/E220E
SPECIFICATIONS
0.24 mm aperture grille pitch (center)
17 inches measured diagonally
90-degree deflection
FD Trinitron
Approx. 327 × 243 mm (w/h)
× 9
3
5
(14
/
/
inches)
4
8
16.0" viewing image
Horizontal: 1600 dots (E220/E220E)
1280 dots (E215E)
Vertical: 1200 lines (E220/E220E)
1024 lines (E215E)
Horizontal: 1024 dots
Vertical: 768 lines
Approx. 312 × 234 mm (w/h)
× 9
3
1
(12
/
/
inches)
8
4
Horizontal: 30 to 85 kHz (E220/E220E)
30 to 70 kHz (E215E)
Vertical: 48 to 120 Hz
120 W
Approx. 404 × 413.5 × 419.5 mm (w/h/
d) (16 × 16
× 16
3
5
/
/
inches)
8
8
Approx. 20 kg (44 lb 1 oz)
DDC1/DDC2B/DDC2Bi
TRINITRON
®
Equator Model
S. Hemisphere Model
N. Hemisphere Model
* Recommended horizontal and vertical timing condition
• Horizontal sync width should be more than 1.0 µsec.
• Horizontal blanking width should be more than 3.0 µsec.
• Vertical blanking width should be more than 500 µsec.
Design and specifications are subject to change without notice.
COLOR COMPUTER DISPLAY
[CPD-E220]
Chassis No. SCC-L35B-A
[CPD-E215E]
AEP Model
Chassis No. SCC-L35D-A
[CPD-E220E]
AEP Model
Chassis No. SCC-L35C-A
H1
CHASSIS

Advertisement

Table of Contents
loading

Summary of Contents for Sony TRINITRON CPD-E220

  • Page 1 All manuals and user guides at all-guides.com CPD-E220/E215E/E220E SERVICE MANUAL [CPD-E220] Equator Model S. Hemisphere Model N. Hemisphere Model Chassis No. SCC-L35B-A [CPD-E215E] AEP Model Chassis No. SCC-L35D-A [CPD-E220E] AEP Model Chassis No. SCC-L35C-A CHASSIS SPECIFICATIONS 0.24 mm aperture grille pitch (center) * Recommended horizontal and vertical timing condition •...
  • Page 2 VIEWS AND IN THE PARTS LIST ARE CRITICAL FOR Parts on Set SAFE OPERATION. REPLACE THESE COMPONENTS WITH SONY PARTS WHOSE PART NUMBERS AP- PEAR AS SHOWN IN THIS MANUAL OR IN SUPPLE- MENTS PUBLISHED BY SONY. CIRCUIT ADJUST- MENTS THAT ARE CRITICAL FOR SAFE OPERATION 0.15 µF...
  • Page 3 1 (power) indicator and inform your authorized Sony dealer of the monitor’s condition. Be sure to note the model Press the 1 (power) button twice to turn the monitor name and serial number of your monitor. Also note the make and off and then on.
  • Page 4 All manuals and user guides at all-guides.com CPD-E220/E215E/E220E TIMING SPECIFICATION PRIMARY MODE MODE AT PRODUCTION MODE 1 MODE 2 MODE 3 MODE 4 MODE 5 MODE 6 MODE 7 MODE 8 RESOLUTION 640 X 480 800 X 600 832 X 624 1024 X 768 1024 X 768 720 X 400...
  • Page 5: Table Of Contents

    All manuals and user guides at all-guides.com CPD-E220/E215E/E220E TABLE OF CONTENTS Section Title Page 1. GENERAL ..............1-1 2. DISASSEMBLY 2-1. Cabinet Removal ..........2-1 2-2. A and D Boards Removal ........2-1 2-3. Service Position ............ 2-2 2-4. Picture Tube Removal .......... 2-2 2-5.
  • Page 6: Disassembly

    All manuals and user guides at all-guides.com CPD-E220/E215E/E220E SECTION 2 DISASSEMBLY 2-1. CABINET REMOVAL Push in the tip of a screwdriver about 10mm to unlock the claw. Cabinet Cabinet Two claws Bezel assembly Bezel assembly Cabinet Two screws (+BVTP 4 x 16) 2-2.
  • Page 7: Service Position

    All manuals and user guides at all-guides.com CPD-E220/E215E/E220E 2-3. SERVICE POSITION A board 2-4. PICTURE TUBE REMOVAL A board CN307 Tention spring Two screws Degauss coil (+BVTP 4 x 16) Neck assembly Deflection yoke CN602 Chassis assembly Four screws (Hexagon) CN903 Connector (2P)
  • Page 8: H Board Removal

    All manuals and user guides at all-guides.com CPD-E220/E215E/E220E 2-5. H BOARD REMOVAL Screw (+BVTP 4 x 16) H bracket Claw Picture tube H board Menu button Bezel assembly Cussion • REMOVAL OF ANODE-CAP NOTE: Short circuit the anode of the picture tube and the anode cap to the metal chassis, CRT shield or carbon painted on the CRT, after removing the anode.
  • Page 9: Harness Location

    All manuals and user guides at all-guides.com CPD-E220/E215E/E220E 2-6. HARNESS LOCATION Degauss coil H board Picture tube D board CN903 CN505 CN902 CN602 AC inlet CN301 CN304 CN310 CN307 A board...
  • Page 10: Safety Related Adjustment

    All manuals and user guides at all-guides.com CPD-E220/E215E/E220E SECTION 3 SAFETY RELATED ADJUSTMENT When replacing parts shown in the table below, the 8) After adjusting the High Voltage within specification, following operational checks must be performed as a put the VR cover on VR501 as shown below and apply safety precaution against X-ray emissions from the unit.
  • Page 11: Adjustments

    All manuals and user guides at all-guides.com CPD-E220/E220E/E215E SECTION 4 ADJUSTMENTS Connect the communication cable of the computer to the connector located on the monitor. Run the service software and then follow the instruction. C Interface Card C Interface Cable HD15 Connector Adapter Computer Video Cable...
  • Page 12 All manuals and user guides at all-guides.com CPD-E220/E220E/E215E • Convergence Rough Adjustment • Convergence Specification 1. Enter the crosshatch signal. 2. Recheck focus and readjust when focus was worse. 3. Adjust roughly H. STAT and V. STAT convergence by 4 MODE All mode pole magnet.
  • Page 13 All manuals and user guides at all-guides.com...
  • Page 14 All manuals and user guides at all-guides.com...
  • Page 15 All manuals and user guides at all-guides.com...
  • Page 16 All manuals and user guides at all-guides.com...
  • Page 17 All manuals and user guides at all-guides.com...
  • Page 18 All manuals and user guides at all-guides.com...
  • Page 19 All manuals and user guides at all-guides.com...
  • Page 20 All manuals and user guides at all-guides.com...
  • Page 21 All manuals and user guides at all-guides.com...
  • Page 22: Semiconductors

    All manuals and user guides at all-guides.com 5-5. SEMICONDUCTORS BH3863F M52743BSP RN1203 2SC4632LS-CB7 MAA3371X BH3863F-E2 LETTER SIDE TOP VIEW 36 pin DIP ST72774 TOP VIEW 24 pin SOP CATHODE ANODE LA78040 TOP VIEW MTZJ-15A BYV26C 42 pin DIP MTZJ-5.1A MCR100 UF05G MTZJ-5.1B MCR100-8RL...
  • Page 23: Exploded Views

    All manuals and user guides at all-guides.com CPD-E220/E220E/E215E SECTION 6 EXPLODED VIEWS NOTE: • Items with no part number and no • Items marked " * " are not stocked since ¡ The components identified by mark description are not stocked because they they are seldom required for routine are critical for safety.
  • Page 24: Picture Tube

    4-072-387-01 BUTTON, POWER 4-060-603-01 SPRING, TENSION 3-653-339-01 SPRING, COMPRESSION 4-072-413-01 BAND, DG COIL 65 0 1-419-255-11 DEGAUSS COIL 4-042-353-11 EMBLEM (NO.7), SONY 4-365-808-01 SCREW (5), TAPPING X-4037-104-1 STAND ASSY * A-1304-219-A H BOARD, COMPLETE S07C2U0342 4-384-096-01 SCREW (4X16), TAPPING, +P...
  • Page 25: Packing Materials

    All manuals and user guides at all-guides.com CPD-E220/E220E/E215E 6-3. PACKING MATERIALS 101 102 ¡ The components identified by mark are critical for safety. Replace only with part number specified. Les composants identifiés par une ¡ marque sont critiques pour la sécurité.
  • Page 26: Electrical Parts List

    All manuals and user guides at all-guides.com CPD-E220/E220E/E215E CPD-E220/E220E/E215E ¡ The components identified by mark Les composants identifiés par une SECTION 7 ¡ are critical for safety. marque sont critiques pour la sécurité. Replace only with part number specified. Ne les remplacer que par une pièce ELECTRICAL PARTS LIST portant le numéro spécifié.
  • Page 27 All manuals and user guides at all-guides.com CPD-E220/E220E/E215E ¡ The components identified by mark Les composants identifiés par une ¡ marque sont critiques pour la sécurité. are critical for safety. Replace only with part number specified. Ne les remplacer que par une pièce portant le numéro spécifié.
  • Page 28 All manuals and user guides at all-guides.com CPD-E220/E220E/E215E ¡ The components identified by mark Les composants identifiés par une ¡ are critical for safety. marque sont critiques pour la sécurité. (a)(d) Replace only with part number specified. Ne les remplacer que par une pièce portant le numéro spécifié.
  • Page 29 All manuals and user guides at all-guides.com CPD-E220/E220E/E215E ¡ The components identified by mark Les composants identifiés par une ¡ marque sont critiques pour la sécurité. are critical for safety. Replace only with part number specified. Ne les remplacer que par une pièce portant le numéro spécifié.
  • Page 30 All manuals and user guides at all-guides.com CPD-E220/E220E/E215E ¡ The components identified by mark Les composants identifiés par une ¡ are critical for safety. marque sont critiques pour la sécurité. Replace only with part number specified. Ne les remplacer que par une pièce portant le numéro spécifié.
  • Page 31 All manuals and user guides at all-guides.com CPD-E220/E220E/E215E ¡ The components identified by mark Les composants identifiés par une ¡ marque sont critiques pour la sécurité. are critical for safety. Replace only with part number specified. Ne les remplacer que par une pièce portant le numéro spécifié.
  • Page 32 All manuals and user guides at all-guides.com CPD-E220/E220E/E215E ¡ The components identified by mark Les composants identifiés par une ¡ are critical for safety. marque sont critiques pour la sécurité. Replace only with part number specified. Ne les remplacer que par une pièce portant le numéro spécifié.
  • Page 33 All manuals and user guides at all-guides.com CPD-E220/E220E/E215E ¡ The components identified by mark Les composants identifiés par une ¡ marque sont critiques pour la sécurité. are critical for safety. Replace only with part number specified. Ne les remplacer que par une pièce portant le numéro spécifié.
  • Page 34 All manuals and user guides at all-guides.com CPD-E220/E220E/E215E ¡ The components identified by mark Les composants identifiés par une ¡ are critical for safety. marque sont critiques pour la sécurité. (d)(h) Replace only with part number specified. Ne les remplacer que par une pièce portant le numéro spécifié.

This manual is also suitable for:

Trinitron cpd-e215eTrinitron cpd-e220e

Table of Contents