Appendix A: Specifications
Table A-16: Calculation dynamic range
Characteristic
Resolution Mode
D Range Mode
Table A-17: Setup memory
Characteristic
Number of memory setups
Save and Recall
Table A-18: CRT display
Characteristic
CRT Viewing Area
Resolution
Table A-19: AC power source
Characteristic
Range
Power Consumption
Maximum Current
A-10
Performance requirements
Performance requirements
Performance requirements
Performance requirements
Reference information
With 10 bit calculation:
Y, R, G, B: -50 to 760 mV,
P
/P
:-390 to +390 mV.
b
r
Waveform may have some distortion when
input data in analog level goes out of above
ranges.
With 9 bit calculation:
Y, R, G, B: -450 to +1170 mV,
P
/P
:-790 to +790 mV.
b
r
Waveform may have some distortion when
input data in analog level goes out of the
above ranges.
Reference information
4 setups (Option 0A/0B/0C)
100 setups (Option 0D)
This function is performed from front panel
menu and remote connector (ground closure)
for the memory location number 1 to 4. For
the other memory location number, it is
controlled through the RS 232C connector.
Reference information
71 (V) X 95 (H) mm
Horizontal: 640 pixels
Vertical:
480 pixels
Reference information
90 - 240 VAC, 48 to 63 Hz
90 W, 100 VA
1.0 A
WFM 1125 Option 0A/0B/0C/0D User Manual