HomeMatic HmIPW-WTH Installation Instructions And Operating Manual page 49

Hazard information
The device is part of the building installation. The
relevant national standards and directives must
be taken into consideration during planning and
set-up. The device is intended for operation
within the Homematic IP Wired bus only. The
Homematic IP Wired bus is a SELV power circuit.
Common cable routing for power supply and the
Homematic IP Wired bus in installation or
junction boxes is not permitted. The required
isolation for power supply of the building
installation to the Homematic IP Wired bus must
be observed at all times. Noncompliance with the
installation instructions can cause fire or
introduce other hazards.
The device may only be used for fixed installa-
tions. The device must be securely attached with-
in a fixed installation.
Observe the installation instructions for installa-
tion in distribution systems (DIN VDE 0100-410).
The device may only be operated within domes-
tic environment, in business and trade areas as
well as in small enterprises.
49