Table of Contents
Advertisement
DMX Linking
The Ovation E-910FC IP can be linked to a DMX controller using a 5-pin DMX connection. Other DMX-
compatible products used with this product can be controlled individually using a single DMX controller.
DMX Personalities
The Ovation E-910FC IP uses a 5-pin DMX data connection for the HSV, 1Ch, 4Ch, 6Ch, 8Ch, 11Ch,
13Ch, 14Ch, or 17Ch DMX personalities.
•
Refer to the
Introduction
•
Refer to the
Operation
personalities.
•
The
Standalone Configuration
personalities.
For more information about DMX standards, Master/Slave connectivity, or the DMX cables
needed to link this product to a DMX controller, download the DMX Primer from the
Chauvet website: www.chauvetprofessional.com.
Remote Device Management
Remote Device Management, or RDM, is a standard for allowing DMX-enabled devices to communicate
bi-directionally along existing DMX cabling. Check the DMX controller's User Manual or with the
manufacturer, as not all DMX controllers have this capability. The Ovation E-910FC IP supports RDM
protocol that allows feedback to make changes to menu map options.
Master/Slave Connectivity
The Master/Slave mode allows a Ovation E-910FC IP (the master) to control one or more Ovation E-
910FC IP products (the slaves) without a DMX controller. One Ovation E-910FC IP becomes the master
when running an auto or custom program, or by being in a Static mode.
Each slave's control panel must be configured to operate in Slave mode. During Master/Slave operation,
the slaves will operate in unison with the master.
DO NOT connect a DMX controller to products operating in Master/Slave mode. The DMX
controller signals may interfere with the signals from the master.
The
Operation
the master and slaves.
Use IP65 data cables to preserve the IP65 rating and the warranty of this product.
8
for a brief description of each DMX personality.
chapter to learn how to configure the Ovation E-910FC IP to work in these
section provides detailed information regarding the DMX
section of this manual provides detailed instructions on how to configure
Ovation E-910FC IP User Manual Rev. 11
Setup
Advertisement
Table of Contents
