OSEE LCM170-A User Manual page 57

Firmware Upgrade
7.
Select USER CONFIGFirmware Upgrade item, it will pop up a
prompt, as shown in Figure 5.1-28:
Figure 5.1-28 Prompt for Firmware Upgrade
Press right arrow(
OK/MENU button to confirm the selection, it will read the new firmware
files from your USB drive and update your firmware. Make sure you
have inserted your USB disk with the stored firmware files into the USB
interface of the monitor, or it will inform you a "Can't Detect USB" error.
Figure 5.1-29 Warning for Firmware Upgrading
 Please keep the monitor are well powered on, and don't remove the USB
drive during the firmware upgrading.
 It is recommended to use a 3.0 USB drive!
 Restart the monitor after successful firmware update, and the new files will
take effect.
) button to select OK command, and click
51
Menu Operations