OSEE LCM170-A User Manual page 44

Menu Operations
Default
Items
Value
Firmware
--
Upgrade
5.1.4.1 FUNCTION KEY and User Preset Menu
User Preset
1.
The user preset provides a series of menu settings customized as a User
Preset, up to 4 presets could be defined in this device.
Set USER CONFIGUser Preset as User1, User2, User3 or User4 to
switch among these various preset settings for current menu display. Or
～
press
and there will be a prompt displaying the current user preset name at the
left center of the screen.
The FUNCTION KEY menu items(F1 Button~F4 Button) are used to
assign function to the function key (F1~F4) on the front panel, and adjust
the value of the function parameter. The menu items of FUNCTION KEY
are as shown in Table 5.1-7:
Table 5.1-7 Functionalities for the Function Key
Default
Items
Value
Camera LUT OFF
Blue Only OFF
Mono OFF
Marker OFF
Audio Meter OFF
Time Code OFF
Waveform
OFF
Type
Vectorscope OFF
Histogram OFF
Domain Range
--
button and hold 2s to select the related user presets,
Range
OFF/ON
OFF/Red/Green/Blue
OFF/ON
OFF/ON
OFF/ON
OFF/ON
LUMA/RGB/
PARADE/OFF
OFF/ON
OFF/LUMA/RGB
38
Description
the factory settings
Upgrade the firmware
Description
Enable/Disable Camera LUT
Enable/Disable blue only
Enable/Disable Mono
Enable/Disable the master
marker switch
Enable/Disable audio meter
display
Enable/Disable time
display
Set the waveform type
Enable/Disable Vectorscope
display
Enable/Disable
display
code
Histogram