OSEE LCM170-A User Manual page 47

Audio Meter Display Mode
1.
Meter Select controls the amount of channels displayed in an audio
meter, and each group(G*) contains four channels. As shown in Figure
5.1-10, the meter displays at the left bottom of the screen vertically.
For example: the Meter Select is G1+G2, and the Display Mode is
Mode2. There is a white rectangle frame with two white level lines in the
meter, the upper is the over level line, and the lower is the reference
level line. If the audio value is higher than the reference level, the audio
bar over the reference level line will display yellow, and if the audio
value is higher than the over level, the audio bar over the over level line
will display red.
Figure 5.1-10 The Position of the Audio Meter On Screen
Audio Meter Display Position
2.
The position of Meter is controlled by Meter Position item, the position
of the meter on the screen is as follows: Left, Right. For example, the
illustrations of the positions are as shown in Figure 5.1-11:
Figure 5.1-11 the Positions of Meter
Figure 5.1-9 Audio Meter
41
Menu Operations