Designated Use; Misuse; Explosion Protection - BONFIGLIOLI ACTIVE CUBE Applications Manual

2.2

Designated use

The frequency inverter is designed according to the state of the art and recognized safety regulations.
The frequency inverters are electrical drive components intended for installation in industrial plants or
machines. Commissioning and start of operation is not allowed until it has been verified that the ma-
chine meets the requirements of the EC Machinery Directive 2006/42/EC and DIN EN 60204-1.
The frequency inverters meet the requirements of the low voltage directive 2006/95/EEC and DIN
EN 61800-5-1. CE-labeling is based on these standards. Responsibility for compliance with the EMC
Directive 2004/108/EC lies with the operator. Frequency inverters are only available at specialized
dealers and are exclusively intended for commercial use as per EN 61000-3-2.
No capacitive loads may be connected to the frequency inverter.
The technical data, connection specifications and information on ambient conditions are indicated on
the rating plate and in the documentation and must be complied with at all times.
2.3

Misuse

Any use other than that described in "Designated use" shall not be permissible and shall be consid-
ered as misuse.
For, example, the machine/plant must not be operated
− by uninstructed staff,
− while it is not in perfect condition,
− without protection enclosure (e.g. covers),
− without safety equipment or with safety equipment deactivated.
The manufacturer shall not be held liable for any damage resulting from such misuse. The sole risk
shall be borne by the operator.
2.3.1

Explosion protection

The frequency inverter is an IP 20 ingress protection rating device. For this reason, use of the device
in explosive atmospheres is not permitted.
11/13
ACU
Spindle Applications 11