Cisco Catalyst 9600 Series Hardware Installation Manual page 51

Installing the Switch
Figure 21: Sliding the Chassis in - Part 2
1
Step 6
Continue sliding the chassis rests completely on the shelf brackets and the crossbar. Slide in further until the
L brackets make contact with the rack posts.
Step 7
Secure the chassis to the rack with either the 10-32 or 12-24 pan head screws from the chassis standard
accessory kit.
Second pair of handholds, pushed in.
Cisco Catalyst 9600 Series Switches Hardware Installation Guide
Rack-Mounting the Chassis
47