Install The Switch With Shelf Brackets; Installing The Shelf Kit L-Brackets - Cisco Catalyst 9600 Series Hardware Installation Manual

Install the Switch with Shelf Brackets

4. Powering up the chassis and verifying the installation.

Install the Switch with Shelf Brackets

Installing the Shelf Kit L-Brackets

The switch chassis is shipped with two L-brackets installed on the front sides of the chassis. If you are
rack-mounting the switch using the shelf kit, these L-brackets must be removed and replaced with L-brackets
that are part of the shelf kit.
Before you begin
You have ordered and received the shelf kit.
Procedure
Step 1
Remove and discard the L-brackets and the ten mounting screws that the chassis is shipped with. Do not re-use
them during any part of the installation process.
Cisco Catalyst 9600 Series Switches Hardware Installation Guide
36
Installing the Switch