Tektronix Option 10 Service Manual page 3

24X5B12467B Options
Service
PREFACE
This manual contains service information about the following options to the TEKTRONIX 24458, 24558, 2465B, and
2467B Oscilloscopes:
Option 10 (GPIB)
Option 05 (TV) and Option 5H (HDN)
0
Option 06 (CTT), Option 09 (CTT and WR), Option 1E (CTT with EFR)
0
Option 01 (DMM)
Option 10 makes it possible to remotely control the instrument through the General Purpose Interface Bus; Option 05 and 5H make it
easier to trigger and view television signals; Option 06 and Option 09 give the oscilloscope increased measurement, counting, and
triggering capability through the Counterflimerflrigger and Word Recognizer, Option 1 E increases the accuracy and resolution of
Option 06 and Option 09 frequency measurements through External Frequency Reference; Option 01 adds a fully autoranging digital
multimeter. Operating information for the options is contained in the Operators manual for the oscilloscope.
A few words about the organization of this manual should be helpful. Some sections deal with each option individually and some
sections apply to all the options. The lists of replaceable electrical and mechanical parts include all the options, but are separated
according to oscilloscope model numbers.
Sections 1 through 4 are each devoted to one of the options. They include these topics: Specifications, Preparation for Use, Theory of
Operation, and Performance Check and Calibration Procedures.
Section
5
covers Maintenance for all the options.
Sections 6 through 9 are the four Replaceable Electrical Parts lists, one for each separate instrument.
Section 10 contains diagrams on foldout pages. Then the diagrams for each specific option are grouped in order, with the Detailed
Block Diagram first and the Troubleshooting Procedure last. The lnterconnection Charts and lnterconnection Diagram complete
Section 10.
Sections 11 through 14 consist of Replaceable Mechanical Parts lists and exploded drawings for all the options.
At the back of the manual there is a place to insert Change Information.