Operators Safety Summary - Tektronix Option 10 Service Manual

24X5B12467B
Options Service
OPERATORS SAFETY SUMMARY
The general safety information in this part of the summary is for both operating and servicing personnel. Specific warnings and
cautions will be found throughout the manual where they apply and do not appear in this summary
Terms In This Manual
Grounding the Product
CAUTION statements identify conditions or practices that could
This product is grounded through the grounding conductor of
result in damage to the equipment or other property.
the power cord. To avoid electrical shock, plug the power cord
into a properly wired receptacle before making any connections
to the product input or output terminals. A protective ground
WARNING statements identify conditions O r practices that could
connection by way ofthe grounding conductor in the power cord
result in personal injury or loss of life.
is essential for safe operation.
Terms As Marked On Equipment
Danger Arising from Loss of Ground
DANGER indicates a personal injury hazard immediately
accessible as one reads the marking.
Symbols In This Manual
This symbol indicates where applicable cautionary
or other information
is
to be found. For maximum
input voltage see Table
1-1.
Symbols As Marked On Equipment
7
DANGER-
High voltage.
@
Protective ground (earth) terminal.
A
ATTENTION
-
Refer to manual.
Power Source
Use the Proper Power Cord
Use only the power cord and connector specified for
your product.
Use only a power cord that is in good condition.
For detailed information on power cords and connectors, see
Table 2-1.
Use the Proper Fuse
To avoid fire hazard, use only a fuse of the correct type, voltage
rating and current rating as specified in the parts list for
your product.
Do Not Operate in Explosive Atmospheres
To avoid explosion, do not operate this instrument in an explosive
atmosphere unless it has been specifically certified for
such operation.
This product is intended to operate from a power source that will DO Not Remove Covers or Panels
not apply more than 250 volts rms between the supply
conductors or between either supply conductor and ground. A To avoid personal injury, do not remove the product covers or
protective ground connection by way of the grounding conduc- panels. Do not operate the instrument without the covers and
tor in the power cord is essential for safe operation. panels properly installed.