Stopping Procedure - Hyundai HYMT5200 User Manual

4.4 Move the ignition switch to the ON (I) position.
4.5 Place the machine on flat level ground and slowly pull the recoil start handle until you
feel resistance.
4.6 Then pull the recoil handle swiftly until the engine starts.
DO NOT allow the recoil handle to snap back, return it to the start position slowly.
4.7 COLD START: As the engine begins to warm, move the choke lever DOWN to the
open position to allow the engine to run smoothly.

5. STOPPING PROCEDURE

5.0 Release the throttle trigger and allow the engine to idle under no load for 20 to 30
seconds.
5.1 Move the ignition switch to the OFF (O) position.
5.2 The engine will now stop.
5.3 Allow the engine to cool completely before storing, refuelling or carrying out any
maintenance.
23