Table of Contents
Advertisement
4. STARTING PROCEDURE
DANGER
ALL FUELS ARE FLAMMABLE
Fuel and defuel in a well-ventilated area.
Allow the engine to cool completely before refuelling.
This machine runs on a 2 Stroke Fuel / Oil Mixture of 40:1
4.0
Remove the fuel cap and fill with a 2 stroke fuel/oil mix.
DO NOT overfill.
Allow a 25mm gap from the top of the fuel tank to allow for fuel expansion.
4.1
Prime the carburettor by repeatedly pressing the primer bulb until fuel is visible
in the bulb.
4.2
COLD START: Move the choke lever UP to the closed position.
4.3
WARM START: Move the choke lever DOWN to the open position.
Fill Level
22
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the HYMT5200 and is the answer not in the manual?