Instruction Manual for Electroblock EBL 30 / EBL 30 with OVP
Meaning of safety symbols
Failure to comply with this sign may result in danger to life or physical con-
Failure to comply with this sign may result in injury.
Failure to comply with the sign may result in damage to equipment or other
General safety instructions
The design of the device is state-of-the-art and complies with approved sa-
fety regulations. Failure to observe the safety instructions may nonetheless
lead to injury or damage to the device.
Only use the device when it is in perfect technical condition.
Any faults affecting the safety of individuals or the proper functioning of the
device must be repaired immediately by specialists.
230V units carrying mains voltage.
Risk of fatal injury due to electric shock or fire:
Do not carry out maintenance or repair work on the device
If cables or the device housing are damaged, no longer use the device
and isolate it from the power supply
Ensure that no liquids enter the device
Only change blown fuses when the device is fully de-energised
Blown fuses may only be replaced once the cause of the fault is
known and has been rectified
Never bypass or repair fuses
Only use original fuses rated as specified on the device
Device parts can become hot during operation. Do not touch them.
Never store heat sensitive objects close to the device (e.g. tempera-
ture sensitive clothes if the device has been installed in a wardrobe)
8110305 BA / EN