Saving And Loading Menu Settings - Canon XA40 Instruction Manual

Saving and Loading Menu Settings

After you adjust settings in the various menus, you can save those settings on an SD card. You can
load those settings at a later date or on another XA45 / XA40 camcorder so that you can use that
camcorder in a similar way.
Camcorder settings can only be saved on or loaded from the SD card in card slot B.
Operating modes:
Saving Camcorder Settings
1 Insert the SD card where you want to save the camcorder's settings into SD card slot B.
2 Select [Save].
> [B # System Setup]
3 Select [Yes].
• The camcorder's menu settings will be saved to the card. If menu settings were previously saved,
the old file will be overwritten by the current menu settings.
4 When the confirmation message appears, select [OK].
Loading Camcorder Settings
1 Insert an SD card that contains previously saved camcorder settings into SD card slot B.
2 Select [Load].
> [B # System Setup]
3 Select [Yes].
• The camcorder's menu settings will be replaced by the settings saved on the card. Then, the
screen will turn black momentarily and the camcorder will restart.
> [Backup Menu Settings 7]
> [Backup Menu Settings 7]
Saving and Loading Menu Settings
>
[Save]
>
[Load]
87