Canon XA40 Instruction Manual page 106

Menu Options
[Æ Recording Setup] menu
Menu item
[¸ Resolution]
[¸ Frame Rate]
[¸ Audio Format] [
106
[Recording Media]
[Dual/Relay
Recording]
[Slow & Fast Motion] [OFF], [x0.4], [x0.5], [x0.8], [x2], [x4], [x10], [x20], [x60], [x120],
[Available Space in
Memory]
[Used Space in
Memory]
[Initialize 8]
[Rec Command]
[HDMI Time Code]
[Time Code Mode]
[Time Code Running
Mode]
[DF/NDF]
[Initial Time Code]
[User Bit Type]
[Color Bars]
[1 kHz Tone]
[MP4 Clip / Photo
Numbering]
[Available Space in Memory]/[Used Space in Memory]:
of the SD card is currently available for recording or how much is in use (« total recording time and
ª total number of photos).
• Estimated figures about available clip recording time and available number of photos are
approximate and based on the video configuration currently in use and a photo size of 1920x1080.
• You can also check the SD card's Speed Class.
[HDMI Time Code]:
camcorder's time code.
[3840x2160 (150 Mbps)], [1920x1080 (35 Mbps)],
[1920x1080 (17 Mbps)], [1280x720 (8 Mbps)]
[¼ 59.94P], [» 29.97P], [º 23.98P]
AAC 16bit 2CH], [
[v Rec Media for Movies]:
[6 Mem. Card A], [7 Mem. Card B]
[{ Rec Media for Photos]:
[6 Mem. Card A], [7 Mem. Card B]
[v Standard Recording], [4 Dual Recording],
[ Relay Recording] (or [
[x600], [x1200]
6 7
[ ], [ ]
6 7
[ ], [ ]
6 7
[ Mem. Card A], [
[i On], [j Off]
[i On], [j Off]
[ Preset], [
[ Rec Run], [
[ DF], [ NDF]
00:00:00.00 to 23:59:59.29, [Reset]
[ Setting], [ Time], [
[i]: user bit input screen (00 00 00 00 to FF FF FF FF).
[j Off], [ SMPTE], [
[ü –12 dB], [þ –18 dB], [ÿ –20 dB], [j Off]
[m Reset], [n Continuous]
When set to [i On], the HDMI signal output from the camcorder includes the
Setting options
LPCM 16bit 4CH]
Relay Recording])
Mem. Card B]
Regen.]
Free Run]
Date];
ARIB]
Displays a screen where you can verify how much
A

– 37

– 37

– 68

– 32

–

– 32

– 38

– –

– –
 
32

– 35

– –

– 64

– 64

– 66

– 65

– 67

– 77

– 77
 
–