Installation Check - Huawei iSiteC BTS3601C Installation Manual

Installation Manual
iSiteC BTS3601C CDMA Base Station
(1) Pole
Figure A-7 Fixing fastener
2) Fix the IAFB to the fastener with M8%25 bolt. Its installation procedure is similar to
that on metal mast. See Figure A-6.
A.5 Installation Check
After all the parts are installed, check the installation in the following aspects: parts
installation overal check, BTS power-on check and environment check.
I. Overall Check
As a review on the whole foregoing installation process, the overall check includes the
following items:
1) Fixation check
The IAFB installed should satisfy the following requirements:
The IAFB should be secure with neat appearance.
l
All the bolts and nuts are fastened with plain washer and spring washer mounted
l
in correct sequence.
There should be no missing or damaged parts, and all the cables should be intact.
l
The IAFB should be clean without any smudge, fingerprint or dust.
l
2) Cable connection check
Power cables should be well connected. The plugs should not be loose or
l
damaged. And there should be no scratch or fissure on the power cable shell.
Check whether the contact of the grounding cables is good.
l
(2) Fastener (3) Plain washer, spring washer, nut
A-6
Hardware Installation
A Installing IAFB
(4) M12 bolt