Installation Manual
iSiteC BTS3601C CDMA Base Station
(1) GPS installation anchor ear
Figure 4-4 Antenna support for installation on metal mast
Installation procedure is as follows:
1)
Unscrew the fastening bolts on GPS installation anchor ear and remove the
anchor ear.
2)
Round the U-shape clip on the metal mast for GPS antenna. Fasten M10 bolt to fix
the GPS installation anchor ear on the metal mast. The structure of GPS
installation anchor ear is shown in Figure 4-5.
(1) Front clamp
Figure 4-5 Structure of GPS installation anchor bolt
4 Installing Satellite Synchronization Antenna and Feeder System
(2) Lightning arrester encloser
(2) Rear clamp
(3) U-shape clip
4-5
(3) Support
(4) M10 bolt
Hardware Installation