Huawei iSiteC BTS3601C Installation Manual page 64

Installation Manual
iSiteC BTS3601C CDMA Base Station
Figure C-4 Tapering inner conductor
7) Brush off the residuals, as shown in Figure C-5.
Figure C-5 Brushing off residuals
8) Apply grease and mount fixing nut. Place the heat-shrink tube into the cable and
then screw the fixing nut to the cable until it is tight, as shown in Figure C-6.
Figure C-6 Screwing fixing nut onto cable
C-3
Hardware Installation
C Making Connectors