Huawei iSiteC BTS3601C Installation Manual page 73

Cdma base station

Hide thumbs Also See for iSiteC BTS3601C:

Table of Contents

Installation Manual

iSiteC BTS3601C CDMA Base Station

Figure D-1 Installation accessories of lightning-protection grounding clips　

Determine the location for lightning-protection grounding clip installation. Cut the

feeder skin according to the clip size to expose the outer conductor, as shown in

Figure D-2.　

Figure D-2 Striping off feeder skin　

Fix the lightning-protection grounding clip on the feeder. The grounding cable of

the clip should be led from the top down with the angle between the feeder and the

grounding cable not greater than 15°, as shown in Figure D-3.　

D-2

Hardware Installation

D Preparing Grounding Clips

Table of Contents

Chapters

Table of Contents