Huawei iSiteC BTS3601C Installation Manual page 70

Installation Manual
iSiteC BTS3601C CDMA Base Station
12) Expand the outer conductor with a f a st cable stripper (fitting the feeder type).
Check the stretching surface and clean off the residuals, as shown in Figure C-18.
Figure C-18 Stretching outer conductor
13) Refit the connector. Never rotate the connector body while installing, as shown in
Figure C-19.
14) Fit the torque, as shown in Figure C-20.
Figure C-19 Fitting connector
C-9
Hardware Installation
C Making Connectors