Perkins 2506 Operation And Maintenance Manual page 24

24
Product Information Section
Customer Specified Parameters
Illustration 18
Typical example of a label that is installed on engines that comply with emissions
Customer Specified
Parameters
To record programmed specifications, use the
following blanks.
Customer Passwords (If required).
• First Password
• Second Password
Rating Selection (L-N)
Equipment ID
Programmable Monitoring System
(PMS)
The Programmable Monitoring System determines
the level of action that is taken by the ECM in
response to a condition that can damage the engine.
These conditions are identified by the ECM from the
signals that are produced from the following sensors.
• Inlet Manifold Temperature Sensor
• Coolant Temperature Sensor
i02566844
• Engine Oil Pressure Sensor
• Engine Crankshaft/Camshaft Sensors
• Inlet Manifold Pressure Sensor
• Fuel Temperature Sensor
SEBU8313-02
g01290859