Table of Contents
Advertisement
Super X11SCE-F User's Manual
2.2 Motherboard Installation
All motherboards have standard mounting holes to fit different types of chassis. Make sure
that the locations of all the mounting holes for both the motherboard and the chassis match.
Although a chassis may have both plastic and metal mounting fasteners, metal ones are
highly recommended because they ground the motherboard to the chassis. Make sure that
the metal standoffs click in or are screwed in tightly.
Phillips Screwdriver (1)
Tools Needed
Location of Mounting Holes
Notes: 1) To avoid damaging the motherboard and its components, please do not use
a force greater than 8 lb/inch on each mounting screw during motherboard installation.
2) Some components are very close to the mounting holes. Please take precautionary
measures to avoid damaging these components when installing the motherboard to
the chassis.
Phillips Screws (8)
C
A
JKVM1:
VGA
USB0/1
SW2
J25
BT1
BMC_HB_LED1
A C
JSD1
SRW3
BAR CODE
BIOS
MAC CODE
JBT1
LICENSE
SRW4
CPU
J22
X11SCE-F
REV:1.02
DESIGNED IN USA
20
Standoffs (8)
Only if Needed
Advertisement
Table of Contents
