Dimm Installation; Dimm Removal - Supermicro X11SCE-F User Manual

DIMM Installation

1. Insert DIMM modules in the following
order: DIMMB2, DIMMA2, then DIMMB1,
DIMMA1. For optimal performance, use
memory modules of the same type and
speed.
2. Push the release tabs outwards on both
ends of the DIMM slot to unlock it.
3. Align the key of the DIMM module with the
receptive point on the memory slot.
4. Align the notches on both ends of the
module against the receptive points on the
ends of the slot.
5. Press both ends of the module straight
down into the slot until the module snaps
into place.
6. Press the release tabs to the lock positions
to secure the DIMM module into the slot.

DIMM Removal

Reverse the steps above to remove the DIMM
modules from the motherboard.
BMC_HB_LED1
A C
Release Tabs
Press both notches
straight down into
the memory slot.
29
Chapter 2: Installation
C
A
JKVM1: VGA
USB0/1
SW2
J25
BT1
JSD1
SRW3
BAR CODE
BIOS
MAC CODE
JBT1
LICENSE
SRW4
CPU
J22
X11SCE-F
REV:1.02
DESIGNED IN USA
Notches