Quick Reference Table - Supermicro X11SCE-F User Manual

Quick Reference Table

Jumper Description
JBT1 CMOS Clear
JPG1 VGA Enable
JPME1 ME Recovery
JPME2 Manufacturing Mode
JWD1 Watch Dog Timer
Connector Description
BT1 Onboard CMOS battery socket
SATA 3.0 Ports (I-SATA6 is on the topside of the motherboard, while I-SATA0 is on the bottom)
I-SATA6, I-SATA0
Five SATA 3.0 ports via the backplane, one SATA 3.0 port via the right angle receptor connector
J22 Connector for AOM-BPN-MC12S Backplane
J25 M.2 PCI-E 3.0 x4 slot (M-Key 2280/22110 with SATA3 support)
JKVM1 KVM Connector for VGA, 2 USB 2.0 and COM Ports
JSD1 SATA DOM Power Connector
JTPM1 Trusted Platform Module (TPM)/Port 80 connector
MICRO-LP CPU MICRO-LP PCI-E 3.0 x8 Slot
SRW3, SRW4 M.2 Holding Screws
SW2 Power Button
UID Unit Identifier Switch
LED Description
BMC_HB_LED1 BMC Heartbeat LED
LED1 UID LED
LED5 Fan Fail/Overheat LED
Default Setting
Open (Normal)
Pins 1-2 (Enable)
Pins 1-2 (Normal)
Pins 1-2 (Normal)
Pins 1-2 (Normal)
Status
Blinking Green: BMC normal
Solid Blue: Unit Identified
Solid Red: Overheating
Blinking Red: Fan Failure or Power Failure
11
Chapter 1: Introduction