Change Password - Advantech PCM-3345 Manual

3.2.9 Change password

To change the password, choose the Change User Password option
form the AMIBIOS HIFLEX SETUP UTILITY menu, and press
<Enter>.
1. If the CMOS is bad or this option has never been used, a default
password is stored in the ROM. The screen will display the
following message:
Press <Enter>.
2. If the CMOS is good or this option has been used to change the
default password, the user is asked for the password stored in the
CMOS. The screen will display the following message:
Enter the current password and press <Enter>.
3. After pressing <Enter> (ROM password) or the current password
(user-defined), you can change the password stored in the CMOS.
The password can be at most eight (8) characters long.
Remember: To enable this feature, you must first select either Setup
or System in Change User Password.
Enter Password:
Confirm Password:
Chapter 3 AMI BIOS Setup
3 3