System Agent (Sa) Configuration - Beckhoff CB1056 Manual

Chapter: BIOS Settings

4.4.2 System Agent (SA) Configuration

Aptio Setup Utility - Copyright (C) 2012 American Megatrends, Inc.
Chipset
┌─────────────────────────────────────────────────────────────────┬────────────────────────────────┐
│ System Agent Bridge Name
│ System Agent RC Version
│
│ CHAP Device (B0:D7:F0)
│ Thermal Device (B0:D4:F0)
│ Enable NB CRID
│ BDAT ACPI Table Support
│ C-State Pre-Wake
│
│
│► Graphics Configuration
│► NB PCIe Configuration
│
│
│
│
│
│
│
│
│
│
│
│
│
│
└─────────────────────────────────────────────────────────────────┴────────────────────────────────┘
Version 2.15.1236. Copyright (C) 2012 American Megatrends, Inc.
 System Agent Bridge Name
Options: none
 System Agent RC Version
Options: none
 VT-d Capability
Options: none
 VT-d
Options: Disabled / Enabled
 CHAP Device (B0:D7:F0)
Options: Disabled / Enabled
 Thermal Device (B0:D4:F0)
Options: Disabled / Enabled
 Enable NB CRID
Options: Disabled / Enabled
 BDAT ACPI Table Support
Options: Disabled / Enabled
 C-State Pre-Wake
Options: Disabled / Enabled
 Graphics Configuration
Sub menu: see "Graphics Configuration" (page 89)
 NB PCIe Configuration
Sub menu: see "NB PCIe Configuration" (page 91)
page 88
SandyBridge
1.5.0.0
[Enabled]
[Disabled]
[Disabled]
[Disabled]
Beckhoff New Automation Technology CB1056
│Enable or disable SA CHAP
│Device.
│
│
│
│
│
│
│
│
│
│
│────────────────────────────────│
│→←: Select Screen
│↑↓: Select Item
│Enter: Select
│+/-: Change Opt.
│F1: General Help
│F2: Previous Values
│F3: Optimized Defaults
│F4: Save & Exit
│ESC: Exit
│
│
│
│
Chipset
│
│
│
│
│
│
│
│
│
│
│
│
│
│
│
│
│
│
│
│
│
│
│
│
│