Installation And Use Of Applications; Pc Applications For Configuration And Control; And Netbox Dsp; Introduction - AEQ NETBOX DSP User Manual

3. INSTALLATION AND USE OF APPLICATIONS.

3.1. PC Applications for configuration and control.

In order to configure each NETBOX 8 AD, NETBOX 32 AD or NETBOX DSP and
define interactions between them, consoles and other units through virtual GPIOs,
"AEQ NetBox Tool" application must be used.
In order to control the system and select sources and destinations of audio signals
processed on NETBOX 8 AD, NETBOX 32 AD and NETBOX DSP, "Dante
Controller" application must be used. Please consult the AEQ AoIP user's manual
for more information.
In order to access to routing and mixing of inputs to outputs of the system on
NETBOX 8 AD MX Audio Router 16x16, NETBOX 32 AD MX Audio Router 64x64
and NETBOX DSP and to processing of inputs on NETBOX DSP, "AEQ Netbox
RTC" application must be used. Please consult the user's manual of "AEQ Netbox
RTC" application for more information.
3.2. "AEQ NetBox Tool": control and configuration software for NETBOX 8, NETBOX 32

and NETBOX DSP.

3.2.1. Introduction.

"AEQ NetBox Tool" application is the control and configuration software for NETBOX 8,
NETBOX 32 and NETBOX DSP.
The auto run disk furnished with those units contains the executable file that installs the
application. Installing it is simply a matter of executing this file and following the on-screen
instructions as they come up.
Once the "AEQ NetBox Tool" application is installed (by default, in C:\Program
files\AEQ\Netbox), you can start it up by double-clicking the icon displayed on the desktop:
23
AEQ NETBOX 32 AD / NETBOX 8 AD / NETBOX DSP
Audio over IP multichannel interfaces