Table of Contents
Advertisement
Settings for the Display
(SCREEN SETUP)
Choose settings according to the TV to be
connected.
Select "SCREEN SETUP" in the Setup
Display. To use the display, see "Using the
Setup Display" (page 63).
The default settings are underlined.
SCREEN SETUP
TV TYPE:
COLOR SYSTEM:
SCREEN SAVER:
BACKGROUND:
TV TYPE
Selects the aspect ratio of the connected TV
(4:3 standard or wide).
16:9
Select this when you connect a
wide-screen TV or a TV with a
wide mode function.
4:3
Select this when you connect a
LETTER
4:3 screen TV. Displays a wide
BOX
picture with bands on the upper
and lower portions of the
screen.
4:3
Select this when you connect a
PAN SCAN
4:3 screen TV. Automatically
displays the wide picture on the
entire screen and cuts off the
portions that do not fit.
16:9
4:3 LETTER BOX
4:3 PAN SCAN
Note
Depending on the DVD, "4:3 LETTER BOX" may
be selected automatically instead of "4:3 PAN
SCAN" or vice versa.
COLOR SYSTEM (VIDEO CD only)
Select the colour system when you play a
VIDEO CD.
AUTO
PAL
16:9
AUTO
ON
JACKET PICTURE
NTSC
Notes
• You cannot change the colour system for DVDs.
• You can change the colour system of this player
according to the connected TV. See page 17.
SCREEN SAVER
The screen saver image appears when you
leave the player in pause or stop mode for 15
minutes, or when you play back a CD or
DATA CD (MP3 audio) for more than 15
minutes. The screen saver will help prevent
your display device from becoming damaged
(ghosting). Press H to turn off the screen
saver.
ON
OFF
Outputs the video signal in the
system of the VIDEO CD,
either PAL or NTSC. If your
TV is the DUAL system, select
AUTO.
Changes the video signal of an
NTSC VIDEO CD and outputs
it in the PAL system.
Changes the video signal of a
PAL VIDEO CD and outputs it
in the NTSC system.
Turns on the screen saver.
Turns off the screen saver.
,continued
65
Advertisement
Table of Contents
