Displaying The Audio Information - Sony DVP-NC555ES Operating Instructions Manual

Notes
• While playing a Super VCD on which the audio
track 2 is not recorded, no sound will come out
when you select "2:STEREO," "2:1/L," or
"2:2/R."
• You cannot change the sound for Super Audio
CDs.

Displaying the audio information

of the disc
Press DISPLAY during playback to display
the Control Menu. Select "AUDIO" using X/
x. The channels being played are displayed
on the screen.
For example, in Dolby Digital format,
multiple signals ranging from monaural to 5.1
channel signals can be recorded on a DVD
VIDEO. Depending on the DVD VIDEO, the
number of the recorded channels may differ.
1
1 2 ( 2 7 )
1 8 ( 3 4 )
T 1 : 3 2 : 5 5
1: ENGLISH
Currently playing program format**
*"PCM," "DTS," or "DOLBY DIGITAL" is
displayed.
In the case of "DOLBY DIGITAL," the
channels in the playing track are displayed
by numbers as follows:
For Dolby Digital 5.1 ch:
DOLBY DIGITAL 3 / 2 . 1
Front component 2+
Center component 1
**The letters in the program format display
indicate the following sound components:
L: Front (left)
R: Front (right)
C: Center
LS: Rear (left)
RS: Rear (right)
Current audio format*
PLAY
DVD VIDEO
PROGRAM FORMAT
DOLBY DIGITAL 3/2.1
L C R
LFE
LS RS
Rear component 2
LFE (Low Frequency
Effect) component 1
S: Rear (monaural): The rear
component of the Dolby
Surround processed signal and
the Dolby Digital signal
LFE: Low Frequency Effect signal
z Hint
When playing Dolby Digital or DTS sound tracks,
"LFE" is encoded in a dotted line when the LFE
signal is not being output.
55