Starting The Ups In Normal Mode; Starting The Ups In Battery Mode - Huawei UPS2000-A-6 kVA User Manual

UPS2000-A-(6 kVA-10 kVA)
User Manual
Symbol

4.5.1 Starting the UPS in Normal Mode

After the UPS is powered on, the LCD screen lights up for 1 second, and then initialization
starts. After the progress bar is complete, the default screen is displayed, as shown in Figure
4-3.
Figure 4-3 Power-on and default screen
Press
is displayed. After the UPS starts successfully, it enters normal mode, as shown in Figure 4-4.
Figure 4-4 Normal mode

4.5.2 Starting the UPS in Battery Mode

After the UPS is powered on, press
lights up for 1 second, initialization starts. After the initialization progress is complete, the
default screen is displayed, as shown in Figure 4-5.
Issue 04 (2019-05-05)
Meaning
Load
Energy-saving mode
for 5 seconds. Release the button when you hear a beep sound. The startup screen
Copyright © Huawei Technologies Co., Ltd.
. Then, the LCD screen lights up. After the screen
4 Control Panel
56