Single Ups Installation; Routing Cables - Huawei UPS2000-A-6 kVA User Manual

Table of Contents

UPS2000-A-(6 kVA-10 kVA)

User Manual



Procedure

Step 1 Visually inspect the UPS appearance for shipping damage. If any shipping damage is found,

report it to the carrier immediately.

Step 2 Move the UPS to the installation position.

Step 3 Unpack the case.

Step 4 Check the UPS.

----End

3.2 Single UPS Installation

UPS installation includes mechanical installation and cable connection.

Determine the installation positions and route cables. Battery boxes can be configured for a

UPS with long backup time, either on the left or right side of the UPS. If two battery boxes

are required, they must be installed next to each other. Figure 3-4 uses the UPS professional

version with long backup time as an example to illustrate how to route cables. It is for

reference only.

Issue 04 (2019-05-05)

Only trained personnel are allowed to move the UPS.

Do not move the UPS by holding its mounting brackets, front panel, terminal cover, or

monitoring module.

Built-in batteries are used for 6 kVA/10 kVA standard version with standard backup time.

Exercise caution when moving them. Prevent the UPS from falling over; otherwise, fire

accidents may occur. Remove rings, watches, and other metal objects when you move the

UPS with built-in batteries.

Do not turn over the UPS during transportation.

To prevent shocks or falls, move the UPS gently. After placing the UPS in the installation

position, unpack it carefully to prevent scratches.

Visually inspect the UPS appearance for shipping damage. If any shipping damage is

found, report it to the carrier immediately.

Check the UPS bar code, which is at the top of the UPS, and ensure that it complies with

the order. If there is any discrepancy, contact your local Huawei office immediately.

Check that the fittings comply with the packing list. If some fittings are missing or do

not comply with the packing list, record the information and contact your local Huawei

office immediately.

3 Installation

Table of Contents

Ups2000-a-10 kva