Table of Contents
Advertisement
UPS2000-A-(6 kVA-10 kVA)
User Manual
Step 8 Set parameters and start the system. If there is more than one UPS.
Step 9 Check whether the new parallel system is working properly. If yes, shut down the system and
switch on the AC output circuit breaker of the parallel system.
Step 10 Switch off the maintenance bypass circuit breaker of the parallel system and start the system.
----End
Issue 04 (2019-05-05)
Copyright © Huawei Technologies Co., Ltd.
5 Operations
104
Advertisement
Table of Contents
