Quick Start Guide
3
Troubleshooting
If the device has not joined to the network after power up, verify the correct
configuration of the network ID and join key. Verify that active advertising has
been enabled on the Emerson Wireless Gateway. The network ID and join key
in the device must match the network ID and join key of the Gateway.
The network ID and join key may be obtained from the Gateway on the Setup
> Network > Settings page on the web interface (see
network ID and join key may be changed in the wireless device by using the
following Fast Key sequence. See the Rosemount 3051 Wireless
Manual
for further troubleshooting.
From the Home screen, enter the Fast Key sequence:
Device Dashboard Fast Keys
16
February 2019
Figure
2-15). The
Reference
3, 5
Emerson.com/Rosemount