February 2019
1
Wireless considerations
1.1
Power up sequence
The power module should not be installed on any wireless device until the
™
Emerson
This transmitter uses the green power module (order model number
701PGNKF). Wireless devices should also be powered up in order of proximity
from the Gateway, beginning with the closest. This will result in a simpler and
faster network installation. Enable Active Advertising on the Gateway to
ensure that new devices join the network faster. For more information, see
the
Emerson Wireless Gateway Reference
1.2
Connecting the transmitter with a Field Communicator
In order for the Field Communicator to interface with the Rosemount 3051
Wireless transmitter, the power module must be connected. This transmitter
uses the green power module (order model number 701PGNKF).
shows how to connect the Field Communicator to the transmitter. Open the
power module compartment to hook up the leads.
Figure 1-1: Field Communicator Connections
Quick Start Guide
Wireless Gateway (Gateway) is installed and functioning properly.
Manual.
Quick Start Guide
Figure 1-1
3