Figure 3-16. Connecting a 4088B Transmitter for a Second Meter Run
1
2
3
4
2.
3.
I/O Configuration and Wiring
Enable termination in software
RS-485 bus, twisted pair required
Enable AC termination using switches.
User-provided power supply (5.4V to 30V)
Set switches on the 4088B for bus termination or use a 120-ohm resistor.
Using FBxConnect, configure COM3 for RS-485 and enable termination for the port.
Emerson FB2200 Flow Computer Instruction Manual
D301784X012
March 2019
79