Appendix B: Atex Non-Sparking Zone 2 Certifications - Emerson FB2200 Instruction Manual

Appendix B: ATEX Non-Sparking Zone 2
Certifications
This appendix includes notes on ATEX certifications. For full details, please refer to the
FB2200 Flow Computer Safe Use Instructions
Special Conditions of Use:
Use equipment in an area of not more than pollution degree 2.
▪
▪ Make provisions to ensure, in the event of transient disturbances, that the rated voltage does
not exceed 140 percent of the peak rated voltage.
Lead acid battery and solar power options are not for use in ATEX applications.
▪
Impact tests on the display were conducted based on Group II values for the low risk of
▪
mechanical danger, in accordance with
60079-0 6th
low.
For Zone 2 installations, ensure that the flow computer is installed and used in such a way to
▪
prevent the danger of electrostatic charges.
The FB2200 enclosure must require a tool to permit access.
▪
Refer to field replacement guides for replacement of the following parts:
▪
Replacement Part
8-Channel Expansion I/O
Module
6-Channel Expansion I/O
Module
HMI Module Display Assembly
I/O Termination Board
CPU Enclosure and Electronics
Sensor
Door Accessories
Relay
Coin Cell Battery
ATEX Non-Sparking Zone 2Certifications
(D301801X012).
Edition. Install flow computers with displays in areas where the risk of impact is
Kit Number
400217010-KIT
400215010-KIT
399379-01-0, 621627011-
KIT, 399380-01-0,
621627020-KIT
400210010-KIT, 358807010-
KIT
621673-01-0, 621674-01-0,
621675-01-0, 621676-01-0,
621678-01-0, 400209010-
KIT, 399260-
Variable Kit Number
399291-01-0, 399267-01-0,
399266-01-0, 621661010-
KIT, 399394-00-0
395828-01-0
395620-03-1
Emerson FB2200 Flow Computer Instruction Manual
Table 13 of both EN 60079-0:2012+A11:2013
Field Replacement Guide
document number:
D301804X012
D301803X012
D301822X012
D301805X012
D301803X012
D301843X012
D301825X012
D301847X012
D301855X012
D301784X012
March 2019
Emerson
and IEC
113