Emerson FB2200 Instruction Manual page 10

Emerson FB2200 Flow Computer Instruction Manual
D301784X012
March 2019
Base I/O consists of:
▪
▪
▪
An optional 8-channel expansion I/O board includes:
▪
▪
If the optional 8-channel expansion I/O board is present, the device can optionally support an
additional 6-channel expansion I/O board which includes:
▪
▪
Table 1-2. FB2200 I/O Configurations
FB2200 Base Unit
MV Sensor (P, DP) or
▪
Static Pressure (SP)
Sensor
▪ Connections for
customer-supplied 2-,
3-, or 4-wire RTD/PRT
2 DI/DO/PI channels
2 AI/AO channels
6
Pressure (P) input from the MV sensor, differential pressure (DP) input from the MV sensor,
connections for temperature (T) input from a customer-supplied RTD/PRT -or – a single
Static Pressure Sensor with RTD/PRT connections. Alternatively, you can purchase the flow
computer without an integral sensor.
Two on-board I/O channels that you can individually configure as digital input (DI), digital
output (DO), or pulse input (PI)
Two on-board I/O channels that you can individually configure as either analog input (AI) or
analog output (AO)
Four I/O channels that you can individually configure as digital inputs (DI), digital outputs
(DO), or pulse inputs (PI)
Four I/O channels that you can individually configure as either analog inputs (AI) or analog
outputs (AO)
Four I/O channels that you can individually configure as digital inputs (DI), digital outputs
(DO), or pulse inputs (PI)
Two I/O channels that you can individually configure as either analog inputs (AI) or analog
outputs (AO)
FB2200 purchased with 8-
channel Expansion I/O Module
▪ MV Sensor (P, DP) or Static
▪ Connections for customer-
6 DI/DO/PI channels (4 residing
on the 8-channel expansion I/O
module).
6 AI/AO channels (4 residing on
the 8-channel expansion I/O
module).
Pressure (SP) Sensor
supplied 2-, 3-, or 4-wire
RTD/PRT
FB2200 purchased with 8-channel
Expansion I/O Module and 6-
channel Expansion I/O Module
MV Sensor (P, DP) or Static
▪
Pressure (SP) Sensor
▪ Connection for customer-
supplied 2-, 3-, or 4-wire
RTD/PRT
10 DI/DO/PI channels (4 residing
on the 8-channel expansion I/O
module and 4 residing on the 6-
channel expansion I/O module)
8 DI/DO channels (4 residing on
the 8-channel expansion I/O
module and 2 residing on the 6-
channel expansion I/O module)
Introduction