Appendix C: Atex Non-Sparking Zone 2 Certifications - Emerson FB1200 Instruction Manual

Appendix C: ATEX Non-Sparking Zone 2
Certifications
This appendix includes notes on ATEX certifications. For full details, please refer to the
FB1200 Flow Computer Safe Use Instructions
Special Conditions of Use:
▪
▪
▪
▪
▪
Replacement Part
End Caps
HMI Module Display Assembly
CPU Board
Termination Board and
Terminal Block
6-Channel I/O Expansion
Board
Sensor Assembly
Coin Cell Battery
This device was evaluated according to the following standards:
▪
▪
▪
▪
ATEX Non-Sparking Zone 2Certifications
Make provisions to ensure, in the event of transient disturbances, that the rated voltage does
not exceed 140% of the peak rated voltage.
Impact tests on the display were conducted based on Group II values for the low risk of
mechanical danger, in accordance with Table 13 of both EN 60079-0:2012+A11:2013 and
IEC 60079-0 6 th Edition. Install flow computers with displays in areas where the risk of impact
is low.
Lead Acid Battery, and Solar Panel options are not for use in ATEX/ IECEx applications.
For Zone 2 installation, take care to install and use the flow computer in such a way that
excludes the danger of electrostatic charge.
Refer to field replacement guides for replacement of the following parts:
IEC 60079-0 6th Edition
IEC 60079-15 4th Edition
EN 60079-0 :2012+A11:2013
EN 60079-15:2010
Emerson FB1200 Flow Computer Instruction Manual
(D301769X012).
Kit Number
399122-01-0 and
399123016-KIT
399379-01-0, 621627011-
KIT, 399380-01-0,
621627020-KIT
399134018-KIT
399185-01-1, 400216010-
KIT, 395791014-KIT
395803000-KIT
400215-01-0
Variable Kit Number
395620-03-1
D301782X012
March 2019
Emerson
Field Replacement Guide
document number
D301814X012
D301816X012
D301802X012
D301820X012
D301819X012
D301842X012
D301854X012
99