Installation; Preparing For Use - probst SPEEDY VS-140/200 Operating Instructions Manual

Installation

6 Installation
6.1

Preparing for use

Attention
Danger
5270.0011/5270.0012/5270.0013/5270.0014
Move the operator handles (1) to the working position as follows: remove the spring
clips (2) from the pins, pull out the pins, move the handles to the desired position (Pos.
1), insert the pins and secure them with the spring clips.
Transport position
Connect electric power to the lifting device. Before connecting, check that the local
voltage and frequency agree with the values shown on the rating plate. If this is not
the case, do not connect the power.
The locally provided power cable (3) must be capable of carrying the rated current of
the lifting device.
Secure the cable (3) to the operator handle (1) with the aid of the Velcro strip (4)
provided for this purpose, to secure the plug-and-socket connection against accidental
releasing (e.g. step on the cable: losing of the load).
V3
Working position
15 / 25
GB