X18L5s has not been licensed by 2. bk5000 only. 3. Use of X18L5s for intraoperative (neuro) has not been licensed by Health Canada. 4. Use of X18L5s for intraoperative (neuro) and elastography has not been CE-marked. 5. Surface use only.
Cleaning. It should also be checked thoroughly once a month following the same procedure. Reprocessing To ensure the best results when using BK Medical equipment, it is important to maintain a strict cleaning routine. Complete details and procedures can be found in Care and Cleaning that accompanies this user guide.
Follow local guidelines for the use of transducer covers in your area. In the United States of America, it is recommended to use transducer covers NOTE: that have been market cleared. In Canada, use only licensed transducer covers. In Europe, transducer covers must be CE-marked. X18L5s User Guide (16-01295-EN-05) Starting Imaging...
The control button on the transducer controls the imaging. Press the button to Start or Stop imaging (freeze frame). Press the button for more than one second to make a copy of the image. May 2019 X18L5s User Guide (16-01295-EN-05)
30° 60° 90° Figure 2. X18L5s’ flexible tip The transducer should be checked before use for cracks or irregularities in the surface. It is important to check the black rubber cover on the transducer handle and the articulation joint on the flexible tip of the transducer to ensure that there are no defects in these areas.
WARNING D-w1 For contaminated disposals such as transducer covers or needle guides, follow disposal control policies established for your office, department, or hospital. May 2019 X18L5s User Guide (16-01295-EN-05)