Table of Contents
Advertisement
1 .5 HPM Firmware Update
This page allows you to update the HPM (Hardware Platform Management) firmware.
To configure, choose 'HPM Firmware Image Location' under Maintenance. To open HPM Firmware Update page,
click Maintenance > HPM Firmware Update from the menu bar.
sample screen shot of
The various fields of HPM Firmware Update are as follows:
· Select Firmware Image: To select the Firmware image to be uploaded.
· Start Firmware Update: To start the Firmware Update.
This wizard takes you through the process of AMI based firmware upgradation. The protocol information to be used
for firmware image transfer during this update is as follows:
Note: All configuration items will be preserved/overwrite as default during the restore configuration operation.
HPM Firmware Update page.
101
Advertisement
Table of Contents
