Installing The Application Onto Flash - XMOS xCORE-200 Multi-channel Audio board Design Manual

USB Audio Design Guide
xmake all
The main Makefile for the project is in the app directory (e.g. app_usb_aud_l1 ).
This file specifies build options and used modules. The Makefile uses the common
build infrastructure in module_xmos_common . This system includes the source files
from the relevant modules and is documented within module_xmos_common .
5.1.2 Installing the application onto flash
To upgrade the firmware you must, firstly:
1. Plug the USB Audio board into your computer.
2. Connect the xTAG-2 to the USB Audio board and plug the xTAG-2 into your PC
or Mac.
To upgrade the flash from xTIMEcomposer Studio, follow these steps:
1. Start xTIMEcomposer Studio and open a workspace.
2. Choose File
3. Click Browse and select the new firmware (XE) file.
4. Click Next and Finish.
5. A Debug Configurations window is displayed. Click Close.
6. Choose Run
7. Double-click xCORE application to create a new Flash configuration.
8. Browse for the XE file in the Project and C/XC Application boxes.
9. Ensure the xTAG-2 device appears in the target list.
10. Click Flash.
From the command line:
1. Open the XMOS command line tools (Desktop Tools Prompt) and execute the
following command:
xflash < binary >. xe
XM0088546.1
Import C/XC C/XC Executable.
Flash Configurations.
51/110