Instant Access Mode - Electro-Harmonix Super Switcher User Manual

I
NSTANT

INSTANT ACCESS MODE 1

Instant Access Mode 1 is used to have instant access to all of the effects
loops using the current preset as a basic set up.
ENTERING INSTANT ACCESS MODE 1: When a preset is active,
pressing the PRESET footswitch will turn off the PRESET LED and the
Super Switcher will enter Instant Access Mode. The Character display
IA
will read
illuminated buttons. If preset 01.1 had loops 4 and 6 engaged, in
Instant Access Mode, the LEDs for footswitches 4 and 6 will light.
The LED for footswitch 1 will turn off since that effect loop is not
active.
MAKING CHANGES: Instant Access Mode can be used to quickly
turn effects on and off within a current preset. Simply press the
footswitch or press the illuminated button to engage or disengage
the corresponding effects loop.
SAVING CHANGES: To save the changes made in Instant Access
Mode to the current preset, press and hold the PRESET footswitch
IA
until the
will be lost if Instant Access Mode is exited without saving.
EXITING INSTANT ACCESS MODE 1: To return to Preset Mode
press the PRESET footswitch. Depending on whether the edits made
in Instant Access Mode were saved, either the old preset will reload,
or the new preset with the new changes will load.
INSTANT ACCESS MODE 2
Press the PRESET footswitch while no preset is active and the Super
Switcher will enter the 2nd Instant Access Mode.
character display and the IA2 preset will be loaded. IA2 will auto save
any changes made to the IA2 preset. There is only one IA2 preset and it
can be called from any bank as long as no preset is active. To exit simply
press the PRESET footswitch.
A M
CCESS
. The LEDs for footswitches 1-8 will change to mirror the
character display blinks for a second. Any changes made
ODE
7
IA2
will show on the