Setup Menu - Electro-Harmonix Super Switcher User Manual

S M
ETUP
GLOBAL SETTINGS
The Super Switcher has many global settings that help to maximize
flexibility. Access the Global Settings menu by doing the following:
ACCESS AND NAVIGATE GLOBAL SETTINGS MENU:
 Make sure you are in Preset mode. The display should not show
IA IA2
or
 Ensure a preset is not loaded. For example, the display might
01.2
show
display shows
 Press and hold the VALUE knob for a couple seconds. The
character display will change to
 The Global Settings menu is now active.
 Turn the VALUE knob to scroll through all Global Settings
headings, such as
 Press and release VALUE to jump in and out of each setting.
 Turn VALUE to change the settings' value. Press and release
VALUE to jump back up to the headings.
BUFFER SETTING (
bFr
• The
global setting and not per preset. The input buffer can help if long
runs of cables are causing high-end loss, particularly between the
Super Switcher and its effects loops or to an amplifier.
• Press and release VALUE to set the status of the buffer. Turn
VALUE to select
• Press VALUE knob to go back. Turn VALUE to show
BPM SETTING (
bPN
• The
is applied globally to all presets or only to the selected preset.
• Press and release VALUE to set the status of the BPM setting.
Then turn VALUE to select
LOC
setting only updates the selected preset.
•
BPM of the entire Super Switcher.
• Press and release VALUE to go back. Turn VALUE to show
ENU
. If it does, press the PRESET footswitch.
. Unload the preset by pressing footswitch 2. Now the
01._
.
bFR
,
bFr
setting controls the status of the input buffer. This is a
ON
or
bPN
):
setting controls whether newly received BPM information
bFr
.
bPn tAP
, , etc.
):
OFF
.
LOC GLO
or
12
bPN
.
GLO
will update the
.
tAP
.