Electro-Harmonix Super Switcher User Manual page 10

ENABLE CC MESSAGE:
• Press the CC illuminated button to engage or disengage the CC
message for the selected preset. When the illuminated button is
lit, the CC message is enabled and will be sent whenever the
selected preset is recalled.
EDIT CC MESSAGE & CHANNEL:
• With the required preset active, press and hold the CC illuminated
button. The CC button will begin to blink and the character display
will show
CCN
is used to edit the CC number. Turning VALUE will show
•
to edit the CC value, and
• With the character display showing
character display will show a three-digit number.
• Turn VALUE to select the CC number. The range is 000-127.
• Press and release VALUE again to go back.
• Turn VALUE so that the display shows
VALUE to edit the CC message's value. The range is 000-127.
• Press and release VALUE again to go back.
• Turn VALUE so that the display shows
VALUE to edit the CC message's MIDI channel. The range is 01-16
ONI
plus
• Press and hold VALUE to exit CC message edit.
MIDI RECEIVE
The Super Switcher can be controlled by other MIDI devices. See
SETUP MENU. Global values for MIDI receive channel, MIDI thru and
MIDI clock ON/OFF are available in SETUP.
The tables on the following page list the Program Change (PC) and
Control Change (CC) messages that the Super Switcher responds to on
its MIDI IN connector.
PC Messages: Use PC messages to directly load presets through MIDI.
For example, if you want directly load preset 03.1, send PC 16.
CC Messages: Use CC messages to directly perform button pushes
through MIDI. CC Values 0-63 send an "off" message, 64-127 send "on".
We recommend interleaving on and off messages for the same button
push.
CCN
.
for Omni, which sends the CC message on all channels.
ChL
to edit the CC send channel.
10
CCN
, press VALUE. The
CCU
. Press and release
ChL
. Press and release
CCU