Table of Contents
Advertisement
4
Disable phone from both transmitting and receiving RF signals
<rst>
0
Do not reset the ME before setting it to <fun> power level
This is default when <rst> is not given
1
Reset the ME. The device is fully functional after the reset.
Example
AT+CFUN=0
OK
AT+COPS?
+COPS: 0
OK
AT+CPIN?
+CME ERROR: 10
AT+CFUN=1
OK
+QUSIM: 0
+CPIN: SIM PIN
AT+CPIN=1234
OK
+CPIN: READY
+QIND: SMS DONE
+QIND: PB DONE
AT+CPIN?
+CPIN: READY
OK
AT+COPS?
+COPS: 0,0,"CHN-UNICOM",2
OK
2.24. AT+CMEE Error Message Format
AT+CMEE controls the format of error result codes: "ERROR", error numbers or verbose messages as
"+CME ERROR: <err>" and "+CMS ERROR: <err>".
WCDMA_UGxx_AT_Commands_Manual
UMTS/HSPA Module Series
WCDMA UGxx AT Commands Manual
//Switch phone to minimum functionality
//No operator is registered
//SIM is not inserted
//Switch phone to full functionality
//Operator is registered
Confidential / Released
28 / 247
Advertisement
Table of Contents
